ECOFOREST ecoGEO C, Инструкция по установке и эксплуатации

Страница: 8 / 106

ecoGEO C Installation and User Manual (Version 1.0)
page 8
3 Overview of the heat pump
3.1 Identifying the model
The ecoGEO C heat pump range includes a built-in, 170 litre hot water tank. This heat pump range is available
in 6 different models depending on their scope and thermal power, as stated in
Table 3.1 .
Model Heating and DHW Free cooling Active cooling Heating output (kW)
ecoGEO C1 3-12 • 3-12
ecoGEO C1 5-22 • 5-22
ecoGEO C2 3-12 • • 3-12
ecoGEO C2 5-22 • • 5-22
ecoGEO C3 3-12 • • 3-12
ecoGEO C3 5-22 • • 5-22
Table 3.1. Models available in the ecoGEO C heat pump range.
ecoGEO C1 versions provide non-simultaneous heating and DHW by use of a 3-way valve. ecoGEO C2 versions,
besides the above, provide free cooling, which allows moderate cooling of the dwelling with a minimum
consumption by the heat pump (consumption only by the circulation pumps). ecoGEO C3 models provide
simultaneous heating/active cooling and DHW through cycle inversion. Finally, each of these three versions can
provide modular heating power in the 3-12 kW and 5-22 kW ranges through inverter compressors.
Accessories
The following accessories are included with the heat pump.
Component Units
Manual 1
1'' flexible hose L = 1200 mm 4
1" Particle filter 2
Rubber Seal Kit 1
th-Tune indoor terminal 1
Outdoor temperature probe 1
Temperature probe for external tank 1
Table 3.2. Accessories included with the ecoGEO C heat pump.