ecoGEO C Installation and User Manual (Version 1.0)
page 37
Before selecting the place the heat pump will be installed, consider the following recommendations.
•
Choose a dry place where there is no risk of frost.
•
If possible, install the heat pump with the back towards an outer wall and in a room where noise
emissions do not pose a problem. Whenever possible avoid installation against bedroom walls or other
rooms where noise can be annoying. Avoid installing the heat pump near a corner, as this can amplify
the equipment's noise emission level.
•
Check that the heating/cooling, brine, cold water and DHW piping can be properly inlalled. To avoid
condensation in the piping of the brine circuit, try minimize these sections inside the building and
insulate them properly.
•
Check that there is sufficient space to carry out the installation and maintenance work on the heat
pump comfortably (see section 5.3).
Once the heat pump positioned in its final location, it is necessary to level it so that it remains horizontal. To
this end it is fitted with adjustable feet of up to 25 mm in height to compensate for possible irregularities of the
base surface. If the irregularities of the base cannot be compensated by the height-adjustable feet, the base
must be sufficiently levelled before installing the heat pump.
Содержание ecoGEO C
Страница 1: ...ecoGEO C Installation and user manual...
