ECOFOREST ecoGEO C, Инструкция по установке и эксплуатации

Страница: 29 / 106

ecoGEO C Installation and User Manual (Version 1.0)
page 29
4.6 SERVICE Menu
The service menu of the ECOFOREST ecoGEO heat pump is intended for less frequent use than the previous
one and includes submenus for changing the language, configuration or secondary information on the heat
pump. It can be accessed from anywhere in the program by simultaneously pressing the
[Prg] and [Esc] buttons
on the front panel. The submenus included in this section are described below.
2. SERVICE Menu
Submenu level 1 Submenu level 2 Submenu level 3
2.1. Change language
2.2. Version
2.3. Work hours
2.4. Installer conf.
2.4.1. Operating scheme
2.4.2. Climate control
2.4.2.1 Design parameters 1
2.4.2.2 Design parameters 2
2.4.2.3 Design parameters 3
2.4.2.4 Design parameters 4
2.4.2.5 Design parameters 5
2.4.3. th-Tune
2.4.3.1 th-Tune
2.4.3.2 BMS configuration
2.4.4. Manual Conf.
2.4.4.1 Digital inputs
2.4.4.2 Brine pump
2.4.4.3 Heating pump
2.4.4.4 Inverter contactor
2.4.4.5 Elec. Heater cont.
2.4.4.6 Zone valve and pump
2.4.4.7 Alarm system
2.4.4.8 DHW valve
2.4.4.9 DHW pump
2.4.4.10 Free cooling valve
2.4.4.11 Reversing valve
2.4.5. Probe conf.
2.4.5.1 Brine outlet Temp.
2.4.5.2 Brine inlet Temp.
2.4.5.3 Heating outlet Temp.
2.4.5.4 Heating inlet Temp.
2.4.5.5 Brine Pressure