ECOFOREST ecoGEO C, Инструкция по установке и эксплуатации

Страница: 26 / 106

ecoGEO C Installation and User Manual (Version 1.0)
page 26
Figure 4.6. Screen for configuring holiday periods, an example that solves the event of a holiday period
with change of year.
MENU 1.2.6 ecoGEO schedule 5 (Scheme 3 or Scheme 4 with th- Tune) / ecoGEO schedule 3
(Remaining operating schemes)
Specific days are defined in which the pump operation will be different from usual. What is selected
here overrides any other front panel calendar.
MENU 1.2. 7 Date/Hour .
Sets the date and time on the front panel.
MENU 1.2.8. Clock
Enable/Disable the time change depending on the season, selecting the transition time and date of
each transition.
MENU 1.3. Heating
MENU 1.3.1 Heating 1
For Scheme 1 shows the setpoint temperature for heating accumulation, which can be modified, and
the pressure and return temperatures of the heating system. For Scheme 3 and Scheme 4 shows the
outlet temperature setpoints calculated for the heating system, measured pressure and return
temperatures. For Scheme 4, adds a calculated setpoint for the 2
nd
zone.
MENU 1.3.2 Heating 2
The heating temperature offset is selected; that is, the degrees below the setpoint temperature at
which heat production begins. Furthermore, if enabled indoor th-Tune terminal and Scheme 3, the
slope of the heating curve can be changed (or of the two heating curves for Scheme 4).