ECOFOREST ecoGEO C, Инструкция по установке и эксплуатации

Страница: 34 / 106

ecoGEO C Installation and User Manual (Version 1.0)
page 34
MENU 2.4.5.3 Heating outlet Temp.
Displays the type and value measured by the heating/cooling outlet temperature probe with
an offset for correcting the value.
MENU 2.4.5.4 Heating inlet Temp.
Displays the type and value measured by the heating/cooling inlet temperature probe with an
offset for correcting the value.
MENU 2.4.5.5 Brine Pressure.
Displays the type and value measured by the brine circuit pressure transducer with an offset
for correcting the value.
MENU 2.4.5.6 Heating Pressure.
Displays the type and value measured by the heating/cooling circuit pressure transducer with
an offset for correcting the value.
MENU 2.4.5.7 Suction Temp.
Displays the type and value measured by the compressor suction temperature probe with an
offset for correcting the value.
MENU 2.4.5.8 Suction Pressure
Displays the type and value measured by the compressor suction pressure transducer with an
offset for correcting the value.
MENU 2.4.5.9 Discharge pressure
Displays the type and value measured by the compressor discharge pressure transducer with
an offset for correcting the value.
MENU 2.4.5.10 DHW Temperature
Displays the type and value measured by the DHW temperature probe with an offset for
correcting the value.
MENU 2.4.5.11 Temp. dep. 2/ outlet Temp. 2
Displays the type and value measured by the buffer tank temperature probe (Scheme 1), or of
the outlet temperature probe in the 2
nd
zone (Scheme 4). Correction with an offset value can
be applied.
MENU 2.4.5.12 Outdoor Temp.
Displays the type and value measured by the outdoor temperature probe with an offset for
correcting the value.
MENU 2.4.6 Alarm log
Accesses a screen on which the heat pump alarm log can be erased.