KGL Operating Manual – VS 3010 BS
2018-07-02
/
127 178
Select the submenu "5 Remote control" in the main menu .
Step 1:
Select the required controller using the cursor buttons (↑) and (↓) or by input of the CAN bus address
Step 2:
(node number
) using the digit buttons. Thereby, the following screen is displayed:
nnn
The main menu of the controller is displayed on the terminal by tapping the
button (if
Step 3:
ENTER
necessary, the input lock must be deactivated before the entry of values; see
8.2.3 Cancelling entry block
Operation via system centre, store computer or operator terminal is only possible for controllers with CAN bus
connection; the deactivation of the input lock is then applicable for all components in the CAN bus system. The
lock-down is automatically reactivated 15 minutes after the last button tap.
The deactivation of the lock is exclusively reserved for service personnel!
Before entering values, the entry block must be deactivated.
8.2.3.1 CI 4x00 system centre - login and logout
Login to and logout (unlock and lock-down) of the system centre:
