Eaton RF System 2.42, Руководство пользователя

Страница: 63 / 244

63 Eaton RF-System
© 2015 Eaton Electrical Group
The shutter actuator can be used for controlling blinds, shutters, awnings, etc. (see Instructions for
Installation). It can be controlled by any sensor of the xComfortproduct family, and of course by
the
Home Manager RF.
As soon as a Connection is established between a sensor and an actuator, the actuator can be
configured.
Right-click the shutter actuator and select the item Settings in the Drop Down Menu .
This should also display the configuration window, which usually looks like that:
The different Setting options are structured as follows:
1. The left box displays the sensors assigned to the shutter actuator (in our case: a double
push-button, Bin 230 and remote control). By left-clicking one of these sensors you can select the
function you want to carry out.
2. The next box (top center) depends on the sensor and displays the commands a sensor can
send to an actuator. They are depicted as icons, with the command buttons you can select from
situated next to them. As you will see later, different functions can now be assigned to these
boxes. In our case (single push-button) the icons stand for the following commands: short push at
the top of the push-button, long push at the top of the push-button, long push at the bottom of the
push-button, and short push at the bottom of the push-button. Moving the mouse pointer to the
different command icons will display a tool tip which briefly explains how to trigger this command.
3. The box top right includes the following command buttons:
OK: Confirms the settings entered and returns to the MRF main window.
OK + Load: Confirms, returns to the MRF main window and immediately loads the