Eaton RF System 2.42, Руководство пользователя

Страница: 238 / 244

238 Eaton RF-System - Help
© 2015 Eaton Electrical Group
Password-selective scanning:
Here you can decide if only those devices that satisfy the specific password conditions should be
scanned. If this option is activated, the MRF will immediately verify upon scanning a device
whether the password in the device matches the password that was entered here. If this is not the
case, the device will not be further scanned and it will be blocked from this scan process. In
addition, there will be no symbol displayed in the workspace for the blocked device. If the
password matches, however, the device will be scanned normally.
There is also a possibility to activate the option "Scan device without password' when entering a
password. In this case, devices that do not have a password will be scanned together with those
devices that do have a password.
If a password-selective scan process is not activated, scanning will proceed normally and devices
that have passwords different from the current project password will be fully scanned, but will be
displayed with a 'blocked symbol'. After scanning, you have the option of unlocking them by
entering their passwords.
Additional scaning options:
Scan battery-supplied devices first: The scan process will not start with the search for
mains-supplied devices; rather, it will wait for the activation of battery-supplied devices.
Do not load any application data while scaning: Activates/deactivates the loading of changed
application data for already-known devices during the scan process.
Rename devices immediately after scan: Pauses the scan process after the scan of each device,
and offers the option of immediately renaming the device in the project. (Additional information can
be found
here )
After scan:
Scan took place password-selectively with a different password than the current project password:
After selective scan with a different password than the current project password, you will be asked
if you wish to set this password as the current project password.