Eaton RF System 2.42, Руководство пользователя

Страница: 81 / 244

81 Eaton RF-System
© 2015 Eaton Electrical Group
The different setting options are structured as follows:
1. The left box displays the sensors assigned to the dimming actuator (in our case: a single
push-button). By left-clicking on this sensor you can select the function you want to carry out.
2. The next box (top center) depends on the sensor and displays the commands a sensor can
send to an actuator. They are depicted as icons, with the command buttons you can select from
situated next to them. As you will see later, different functions can now be assigned to these
boxes. In our case (single push-button) the icons stand for the following commands: short push at
the top of the push-button, long push at the top of the push-button, long push at the bottom of the
push-button, and short push at the bottom of the push-button. Moving the mouse pointer to the
different command icons will display a tool tip which briefly explains how to trigger this command.
3. The box top right includes the following command buttons:
OK: Confirms the settings entered and returns to the URF main window.
Cancel: Discards the modifications entered and returns to the URF main window.
Info: Opens the Help dialog for Dimming Actuators
4. The functions bar enables you to select the different functions which the analog actuator carries
out when it receives a specific command. There is a standard function for each sensor which the
analog actuator defines after establishing the connection to a sensor (same as in Basic Mode).
Some functions occupy more than just one command button, as we will see in the following
function descriptions: