Eaton RF System 2.42, Руководство пользователя

Страница: 107 / 244

107 Eaton RF-System
© 2015 Eaton Electrical Group
The window is set up as follows:
Field 1:
Here you can define the names of the different smoke detector inputs. There is a max. of 5 smoke
detector inputs available. In this field you can also define the texts to be displayed in the status
messages.
Field 2:
Under ”Status Alarm“ you can define in which status the alarm should be triggered.
Field 3:
Within the time period you preset here, the Room Manager expects to receive a status message
from the smoke detector input. If the Room Manager does not receive a status message within
that preset time, the alarm will be triggered.
Field 4:
Here you can display the names of the RF sensors that have been assigned.
Field 5:
If this option has been activated, the Room Manager will give an acoustic alarm once in a minute
in case the battery of the sensors is low.
Field 6:
This is where you can define what actions should be carried out in case of an alarm.
It is possible to switch on 1 output for an adjustable time period in case of an alarm.
It is also possible to activate the acoustic alarm of the Room Manager for an adjustable time
period.