CV3100 series and MINI series high performance general purpose inverter instruction manual
6-22
t1: actual jog acceleration time;t3: actual jog deceleration time;
t2: Jog running time;f1: jog running frequency.
Note:
P2.20
，
P2.21 is the accel.& decel time when jog frequency is equal to basic
frequency (50Hz)
，
however the factory setting of jog frequency is10 Hz
，
so calculating
according to this proportion, the actual accel. & decel. time shall be set as 20% of
factory setting value. In addition, the jog running command can be realized by keypad,
external terminals or PC input.
P2.22
Accel. time 2
Determined by inverter type
P2.23
Decel. time 2
Determined by inverter type
P2.24
Accel. time 3
Determined by inverter type
P2.25
Decel. time 3
Determined by inverter type
P2.26
Accel. time 4
Determined by inverter type
P2.27
Decel. time 4
Determined by inverter type
Setting range
0.1-3600s
Please refer to P3.09 for the setting of above parameters.
The above parameter set the accel and deccel.time of 2,3,4 respectively.
Accel. & decel. time 1
、
2
、
3
、
4 all can selected by control terminals,and as the accel
and deccel.time during inverter running. The function of terminals is determined by
the choice of P4.00-P4.05.
P2.28
The 1st step freq.
Factory setting
5.00Hz
P2.29
The 2nd step freq.
Factory setting
10.00Hz
P2.30
The 3rd step freq.
Factory setting
15.00Hz
P2.31
The 4th step freq.
Factory setting
20.00Hz
P2.32
The 5th step freq.
Factory setting
25.00Hz
P2.33
The 6th step freq.
Factory setting
30.00Hz
P2.34
The 7th step freq.
Factory setting
40.00Hz
P2.35
Reserved
Setting range
0.00-Upper limit frequency
They are used to define the frequency for multi-step speed running from step 1 to7.
Please refer to P7.00 for details.