Dynapac CC950, Инструкция по эксплуатации

Страница: 95 / 143

Maintenance, 10h
4812164101_A.pdf 2022-02-09
Coolant, Level check - filling
Place the roller on a level surface.
Fig. Engine compartment
1. Filler cap
2. Sight glass
1
2
Stand firmly with both feet on a non-slip surface.
Check that all hoses/hose connectors are intact and
tight.
Check that the coolant level is between max./min. in
the sight glass (2).
Top up with coolant if the level is too low.
For filling, loosen the filler cap (1) and make sure that
the coolant level is between max/min in the sight glass
(2).
Now screw on the filler cap (1) again.
Use the following protective equipment: Use the following protective equipment:
Eye protection Eye protection
Protective gloves. Protective gloves.
Do not open the filler cap while the engine is
warm, as the radiator may contain fluid and/or
steam under pressure, which may cause skin and
eye damage. Do not open the filler cap while the engine is
warm, as the radiator may contain fluid and/or
steam under pressure, which may cause skin and
eye damage.
Fill with a mixture of 50% water and 50% anti freeze.
See the lubrication specifications in these instructions
and in the engine manual.
Flush the system every other year and change
the coolant. Make sure also that the air flow
through the cooler is unobstructed. Flush the system every other year and change
the coolant. Make sure also that the air flow
through the cooler is unobstructed.
85