Dynapac CC950, Инструкция по эксплуатации

Страница: 86 / 143

Maintenance - Maintenance schedule
4812164101_A.pdf 2022-02-09
Every 2000 hours of operation
Refer to the contents to find the page number of the
sections referred to !
Pos.
in fig Action Comment Pos.
in fig Action Comment
1 Drain and clean the water tank 1 Drain and clean the water tank
4 Clean the outside/inside of radiator core In dusty environments, as
necessary 4 Clean the outside/inside of radiator core In dusty environments, as
necessary
6 Change the fan belt 6 Change the fan belt
6 Change the engine oil Refer to the engine manual 6 Change the engine oil Refer to the engine manual
6 Change the oil filter Refer to the engine manual 6 Change the oil filter Refer to the engine manual
6 Change the breather valve on the engine Refer to the engine manual 6 Change the breather valve on the engine Refer to the engine manual
6 Change the engine valve clearances Refer to the engine manual 6 Change the engine valve clearances Refer to the engine manual
6 Check coolant freezing point Change the coolant every
other year 6 Check coolant freezing point Change the coolant every
other year
7 Replace the air cleaner filter element - Check that
hoses and connectors are tight Refer to the engine manual 7 Replace the air cleaner filter element - Check that
hoses and connectors are tight Refer to the engine manual
12 Change the hydraulic fluid filter 12 Change the hydraulic fluid filter
13 Check the hydraulic reservoir cover / breather 13 Check the hydraulic reservoir cover / breather
13 Change the hydraulic fluid 13 Change the hydraulic fluid
14 Drain and clean the fuel tank Refer to the engine manual 14 Drain and clean the fuel tank Refer to the engine manual
15 Check the condition of the articulation 15 Check the condition of the articulation
16 Change the oil in the front drum 16 Change the oil in the front drum
18 Change the water in the rear drum 18 Change the water in the rear drum
2 Check lubrication of controls and pivots Lubricate as necessary 2 Check lubrication of controls and pivots Lubricate as necessary
Replace valve cover gasket Refer to the engine manual Replace valve cover gasket Refer to the engine manual
Replace the hydraulic pump drive system belt Replace the hydraulic pump drive system belt
76