Dynapac CC950, Инструкция по эксплуатации

Страница: 117 / 143

Maintenance - 400 / 800 / 1200 / 1600 h
4812164101_A.pdf 2022-02-09
Air cleaner filter element - Change
Fig. Air cleaner
2. Element
2
Be sure the reinstall the detached safety shield
after maintenance or checking. Be sure the reinstall the detached safety shield
after maintenance or checking.
Use caution. Wear gloves. Use caution. Wear gloves.
Protective gloves Protective gloves
Replace the air cleaner filter element (2).
Check that hoses and connectors are tightened.
Refer to the engine manual for detailed
instructions. Refer to the engine manual for detailed
instructions.
Dispose of the old filter carefully. Dispose of the old filter carefully.
Hydraulic reservoir cap - Check
Unscrew and make sure that the reservoir cap is not
blocked. Air must have unobstructed passage through
the cap in both directions.
2
Fig. Engine compartment,
right side
1. Hydraulic fluid tank cap
2. Hydraulic oil level
1
If blocked in either direction, clean with a little diesel oil
and blow with compressed air until unblocked or
replace the cap with a new one.
When working with compressed air, use the
following protective equipment: When working with compressed air, use the
following protective equipment:
Safety glasses Safety glasses
Protective gloves Protective gloves
Ear protectors Ear protectors
107