Dräger FTS 8000, Руководство по эксплуатации

Страница: 77 / 92

Troubleshooting
Edition 03 / 69 06 898 73
FTS 8000
8 Troubleshooting
8.1 Target groups
Troubleshooting is only permitted to be carried out by the following target groups. The
exact target group is clearly assigned the relevant activities.
•
Trainer
• Specially trained personnel
• Technical personnel
8.2 Safety instructions
!
DANGER
Danger of death due to gas leak
Observe the following rules during all work on gas-carrying components:
• Before starting work on gas-carrying lines, test the working area for leaking gas.
• To detect a possible gas leak at an early stage during work, a mobile gas detector
should be carried along to each area of the system.
• After working on gas-carrying lines, check all lines and connections for leaks.
!
DANGER
Danger of death due to electrocution
Observe the following rules during all work on electric and electronic components:
• Accidental activation of the power sources can result in serious injuries. Disconnect the
power supply before all work.
• Check the correct grounding of the system before all work.
• Avoid electrostatic effects on electronic components to prevent damage to the
components.
• Carefully seal electric/electronic connections to avoid damage.
!
DANGER
Danger of death due to incorrect tools
Only use low-sparking tools during all work.
!
WARNING
Incorrectly connected connections and cables can cause serious damage to the system.
Proceed carefully when connecting lines and cables.
!
WARNING
Danger of death and risk of equipment damage due to faulty system components
All system parts and components not in perfect condition must be replaced without delay.
Until that point, the system is not permitted to be operated.