manualshive.com logo in svg

Dräger FTS 8000, Руководство по эксплуатации

Поделиться
Скачать
Dräger FTS 8000 Скачать руководство пользователя страница 51

Operation

Edition 03 / 69 06 898

47

FTS 8000

5.6

Software

5.6.1

General buttons

All general buttons used in the software are described below.

5.6.2

Status displays in the software

i

i

NOTICE

Not all functions described in the software operations are necessarily integrated into the 
installed software. Some functions may be limited or not available depending on the 
system.

Fig.

Designation

SPS/HMI-Status

The animation shows the functioning connection between the programmable 
logic control (PLC) and the Human-Machine Interface (HMI).

Lower menu bar switchover. 

When there are more menu options in the lower menu bar than can be 
displayed, the arrow can be used to move to the other menu options.

HMI messages

Pressing the button switches the page to the HMI messages.

Project information and other buttons

Pressing the button changes the menu view to the Project Information window 
and there are other buttons displayed for specific settings.

Change user

Pressing the button changes the menu view to the Login screen and the user 
can be changed.

Logging out the user

Pressing the button logs out the current user and the menu view changes to 
the start screen.

Change language

The language can be changed by pressing this button.

Setting the date and time

The date and time can be set by pressing the button.

General settings

Pressing the button changes the menu view to the System Images screen, 
from where the general settings can be accessed, such as screen calibration.

Logoff

Pressing this button logs the user off and shuts down the system control 
program. The Windows interface is displayed.

Содержание FTS 8000





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды