Dräger FTS 8000, Руководство по эксплуатации

Страница: 74 / 92

Servicing and maintenance
Edition 03 / 69 06 898 70
FTS 8000
8. Only use spare parts that are listed in the order list. Otherwise the functional integrity
and safety of the system may be compromised.
9. Any work where there is a risk of falling down must only be carried out with suitable
anti-fall guards.
7.4 Maintenance and servicing overview
7.4.1 Regular inspections: at the beginning of every exercise day
Section Inspection Target group
Entire system Inspection of the system for visible damage
Inspection and, if necessary, cleaning of
the system surfaces for contamination with
the appropriate equipment
Check the system lighting Trainer
Pipes Check all pipes for visible damage, rust and
leaks Trainer
Thermal elements Check all thermal elements for visible
damage Trainer
Gas sensors Check the gas sensors for visible damage
Function test Trainer
Water bath pans Inspection of and, if necessary, drainage of
the water in the water bath pans via the ball
valve and subsequent cleaning of the tanks Trainer
Technical room Cleaning of the screens in the technical
room using suitable agents Trainer
Flues Visual inspection, cleaning if necessary
with a high-pressure jet
Functional test for correct motion Trainer
Fire room paneling and
panels Check the replaceable fireplace panels and
the flash over panels for damage and
deformation Trainer
Grounding Check all grounding connections to steel
constructions, cabinets, pipes and
mechanical cable ducts. Trainer
All moving parts (bolts,
doors, platforms, etc.)
and seals Visual and functional inspection for wear,
deformations and proper fit Trainer
Temperature monitoring Function test Trainer