Assembly and installation
Edition 03 / 69 06 898
30
FTS 8000
6. Connect containers 1 and 2 with bridge fittings.
To do this, suspend and secure one bridge fitting
on each side top and bottom in the openings of
the container edges.
Containers 1 and 2 are connected to one another
.
7. Lift container 3 in accordance with the lifting instructions (69 21 865) in appendix 1 of
this customer documentation and align at a 90° angle to container 2. To do this, fully
open the doors of container 3 and secure on the container wall. Half close the doors
of container 2 again on the connection side to be able to push container 3 up against
container 2. Ensure that the fireplace in container 3 is aligned with the side door of
container 2.
8. Align container 3 flush with the angled profiles of container 2 and push onto container
2.
9. If necessary, support container 3 on StabPack blocks.
10. Connect containers 2 and 3 with bridge fittings. To do this, suspend and secure one
bridge fitting on each side top and bottom in the angled profiles (container 2) and in
the openings of the container edges (container 3).
Containers 2 and 3 are connected to one another.
11. Lift the flues for containers 1 and 2 separately using a suitable crane on the crane lug
and carefully set down on the corresponding flue mount of the container roofs.
Fig. 21 Bridge fitting C1 and C2
C3
C1
Fig. 22 Alignment of C3 with C1
C3
C2
Fig. 23 Alignment of C3 with C2
C2
C3
Fig. 24 Connections C2 and C3 (bottom)
C3
C2
Fig. 25 Connections C2 and C3 (top)
Содержание FTS 8000
Страница 1: ...FTS 8000 enUS Operating manual 69 06 898...
