Doran 2200 Series, Инструкция по эксплуатации

Страница: 70 / 136

69
There are two methods to access the data stored in the print buffer memory. One is
using serial commands “d”, “D”, or “CB”. The other is to use the Communications Menu
to select a Print Buffer function. To enter the Communications menu, press and hold
PRINT push button for 3 seconds. Use the UNITS button to scroll through the menu
parameters. Use ZERO push button to select a function. Press ENTER push button to
save and exit. Press CLEAR to exit without saving current menu selection.
The Communications menu’s print buffer options/functions:
Turn On the print buffer, set the Handshaking parameter to
HS bUF.
Turn Off the print buffer, set the Handshaking parameter to
HS SF.
Dump data stored in print buffer to serial port 1, select
bUF dP.
Dump & clear data stored in print buffer, select
bUF dC
.
Clear data stored in print buffer, select
bUF CL
.
Total transmission time for the print buffer to dump 65,000 bytes of data is: 1:15 @
9600 baud or 0:26 @ 38.4K baud. Display will show DUMP message while the print
buffer is transmitting data through serial port 1.