Doran 2200 Series Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 136

background image

17

Press ZERO to momentarily display the current parameter settings and output logic for
that individual setpoint.

Change Setpoint Values

Press SET POINT to enter the setpoint edit mode. The last viewed or edited setpoint
will be displayed. Press UNITS or PRINT to scroll through the eight available setpoints.
The annunciators below the main display indicate the current setpoint.

To change the setpoint value, enter the setpoint value using the numeric keypad. Press
ENTER to accept the change and return to the weigh mode or press UNITS or PRINT to
save and edit other setpoints. Press SET POINT to exit this mode.

The display will read

abort

to indicate no changes were made to the setpoint values or

the display will read

SaVed

to indicate the setpoint value is saved.

NOTE:

On 2200B models configured for Batch Operating mode, the SET POINT button

is disabled when the batch sequence is running.

Barcode Entry of Setpoint Values

Press SET POINT to enter the Setpoint edit mode. The display will momentarily show

SEtPt

, then flash the current setpoint weight. Press UNITS or PRINT to scroll to the

desired setpoint number. The annunciators below the main display indicate which
setpoint is currently displayed.

Using Doran’s optional barcode scanner, scan the desired barcode. The display will
read

SAVEd

to indicate the scanned setpoint weight is saved. The display will flash the

new setpoint weight scanned from the barcode. No special serial commands are needed
prior to the weight data in barcode value. The barcode value must not exceed the
indicator's count by resolution and cannot be greater than the capacity. The barcode
value can be read into each of the eight available setpoints. To exit the edit mode, press
the SET POINT button.

Display Preact Values

Press and hold the SET POINT button for three seconds to display the Preact weight
values. The last viewed or edited preact will be displayed. Press UNITS or PRINT to
scroll through the eight available setpoints. The annunciators below the main display
indicate the current setpoint. Press SET POINT to exit this mode, the display will read

abort

to indicate no changes were made to the setpoint values.

Press ZERO to momentarily display the current parameter settings and output logic for
that individual preact.

NOTE:

On 2200B models configured for Batch Operating mode, the SET POINT button

is disabled when the batch sequence is running.

«
...
16
17
18
19
20
...
»

Содержание 2200 Series









































































































































Отзывы:

Нет отзывов

Похожие инструкции для 2200 Series

Бренд: Data Aire Страницы: 82

Бренд: RAKINDA Страницы: 20

Бренд: ZALMAN Страницы: 20

AdvancedPunch Pro

Бренд: GBC Страницы: 92

Бренд: Wallenstein Страницы: 48

Бренд: Taffio Страницы: 8

Бренд: Fronius Страницы: 56

Бренд: Hyena Страницы: 13

Бренд: Kolpin Страницы: 25

AquaSensors AnalogPlus 1.0

Бренд: Thermo Scientific Страницы: 24

Бренд: Hartan Страницы: 86

MOLLE PANELS RAM 2500

Бренд: PUTCO Страницы: 4

Бренд: Westfalia Страницы: 18

Бренд: Uni-Com Страницы: 6

Stacker 701P98048

Бренд: Xerox Страницы: 16

BES M12EG2-PSC20B-BV02-EXF

Бренд: Balluff Страницы: 32

Бренд: GE Страницы: 12

Бренд: Sandel Страницы: 56

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды