Doosan GL08K, Руководство по эксплуатации и техническому обслуживанию

Страница: 52 / 206

Maintenance - 46 -
3. Maintenance
3.1. Engine Disassembly
3.1.1. Heed at disassembly

Before disassembly, the part shelf should be prepared for various tools and repair parts.

When assembling, clean empty hand should be used and clean environment maintained.

In case of storing the disassembled parts, each part should not touch each other.

In case of disassembly, the parts should be laid in order.
3.1.2. Oil level gauge

Pull out the oil level gauge.
3.1.3. Cooling water

Remove the radiator cap. Open the drain
valve at the radiator lower part to drain
the coolant as the right figure.
CAUTION :
When removing radiator filler cap while
the engine is still hot, cover the cap with
a rag, then turn it slowly to release the
internal steam pressure. This will
prevent a person from scalding with hot
steam spouted out from the filler port.

Remove the drain plug from the cylinder
block and drain out the cooling water into
a container.
EG9OM027
Radiator Cap
Radiator
Drain valve
ED4OM014
Drain plug