Polishing Process Selection and Polishing Procedure
1. On the “Home” tab, select the desired polishing process definition
by touching the DOWN arrow in the “Process Selection” box and
then touching the desired process (Fig. 12B).
2. Select “Production” tab (Fig. 13A).
Fig. 12B
35
1. Plug the power cord into the back of the machine and into a
properly grounded outlet, 100-240VAC 50/60Hz. If your power
cord is equipped with a GFCI Style plug, you MUST push the
“Reset” button on the plug to supply power to the machine.
2. Turn on power switch located at the back of the machine.
3. Lift screen cover. (Note: screen cover should be down when
machine is operating.)
4. The touchscreen should default to the “Home” tab screen
(Fig. 12A). If the
RED
“Emergency” screen is displayed, reset by
turning the “Emergency Stop” button CLOCKWISE.
5. Select desired language using “Language” button on the bottom
right of the Home Tab (Fig. 12B).
6. Press “Machine Start” Button.