Fig. 4
To DELETE a lubricant name, highlight the name, then select the
“Delete” button.
Transferring Process Variables
Once your variable settings have been established, they can be
copied to a USB memory stick. This allows “Process Variable Data”
to be transferred to other APM-HDC-5400 machines as well as
providing backup and retrieval capability.
A USB memory stick has been included with the shipment of your
APM-HDC-5400 with default process variables.
To SAVE process variable data to a USB:
1. Insert USB storage device into USB port on either side of the
machine.
2. Select “System Config” tab, then select “Process Variable
Settings”.
3. Copy settings by selecting “Machine Memory to Memory Stick”.
You will be notified, if Process Variable Data already exists on
the USB memory stick.
NOTE: If the USB memory stick already contains variable data,
copying the “Machine Memory to Memory Stick” will overwrite
the variable settings on the stick.
To load “Process Variable Data” from an already existing file on a
USB storage device, use the following procedure:
16