Clean Plunger & Mandrel
The Clean Plunger & Mandrel maintenance is tied to the number
of hours the Platen is rotating. To set the Clean Plunger & Mandrel
Maintenance interval:
1. Use a stylus to press the number located under “Hour Interval”
tab. This will access the keypad for data entry.
2. Use the keypad to set hours of use before changing Platen
Grease. The recommended interval is 40 hours. This can be
modified as needed.
Load Cell Calibration
The Load Cell Calibration maintenance is tied to the number of hours
the Platen is rotating. To set the Load Cell Calibration Maintenance
interval:
1. Use a stylus to press the number located under “Hour Interval”
tab. This will access the keypad for data entry.
2. Use the keypad to set hours of use before changing Platen
Grease. The recommended interval is 40 hours. This can be
modified as needed.
Replace Koby Filter
The Replace Koby Filter maintenance is tied to the number of hours
the Platen is rotating. To set the Replace Koby Filter maintenance
interval:
1. Use a stylus to press the number located under “Hour Interval”
tab. This will access the keypad for data entry.
2. Use the keypad to set hours of use before replacing the Koby
Filter. The recommended interval is 320 hours. This can be
modified as needed based on actual working conditions.
Replace Rubber Pad
The Replace Rubber Pad maintenance schedule is tied to the number
of hours the Platen is rotating. To set the Replace Rubber Pad
maintenance interval:
1. Use a stylus to press the number located under “Hour Interval”
tab. This will access the keypad for data entry.
22