Docomo Foma P700i, Руководство пользователя

Страница: 115 / 565

112
Tone/Display/Light
Setting
●
You cannot set the ring tone for “Group 00” or for groups in the UIM.
●
Note that the “Ring tone” setting of “Utilities” is valid only when the Caller ID is provided. It is advisable to activate “Caller ID request”
in advance.
●
To change the set ring tone, release the current setting and proceed.
●
If you store the same phone number or mail address in multiple groups, the ring tone set for the group of the phone number or mail
address which is accessed initially in the search order of column search has priority.
●
You can set this function for either the group in which secret and ordinary Phonebook entries are stored together or the group in
which only secret entries are stored; however this function is disabled if you receive a call or mail from the secret entry. In that case,
the ring tone sounds according to the setting of “Select ring tone”.
●
Use “Utilities” to check which group is set, or to release the setting.
Information
You can set a ring tone for each group of the FOMA phone’s Phonebook.
If you have set the ring tone by phone number or mail address, that setting has priority.
Group setting Select a group ( ) Utilities
Ring tone ····················Sets a ring tone or an i-motion movie for incoming voice calls and video-phone calls.
Mail ring tone ·············Sets a ring tone or an i-motion movie for incoming i-mode mail or Short Message (SMS).
Go to step 3 on page 111.
The set item is indicated by “
★
”.
●
To release the ring tone for group, perform the same operation.
1
Set by Group