Docomo Foma P700i, Руководство пользователя

Страница: 78 / 565

75
Making/Receiving
Video-phone
Calls
Talk when the other party comes online
●
“ ” or “ ” will blink at the upper right of the display during video-
phone dialing and light steadily during the call.
●
You can switch to Hands-free during a call by pressing .
(See page 59)
● You can press numeric keys to send touch-tone signals during a call.
However, switch to the DTMF transmission mode if during a Chara-den
call. (See page 84)
●
If you close the FOMA phone during a call, the FOMA phone works in
accordance with the setting of “Fold setting”. (See page 62)
●
When the Flat-plug Earphone/Microphone Set with Switch (option) is
connected, you can hear the caller’s voice from the earphone. (See page 421)
●
During a video-phone call, you can press to send the substitutive image to the other party.
To resume sending the image through your camera, press again.
●
You can use “Camera image sending” to select whether to send the image through your camera to the other party.
● Press during a call to put the call on hold. (See page 66)
2
Enter the other party’s phone number.
●
If you press or to dial, the voice phone call is made even when an image to send to the
other party is selected by “Select image” or even when “Dialing speed” is set to “64K” or “32K”.
●
Press ( ) to store the entered phone number in the Phonebook. Go to step 2 on page 97.
●
You are advised to dial at 64K to have a video-phone call between FOMA phones.
1
The digital
communication charges
start from this display.
Press to end the call after talking.
3
Making a Video-phone Call
■
When a video-phone call cannot be connected
When a video-phone call cannot be connected, the reason is displayed. (The displayed reason might not be the same as the actual
reason depending on the dialed party’s phone and contract for network services.)
Messages Reasons
Check the number and retry You have dialed a wrong phone number.
Busy The line is busy or during packet transmission.
Out of service area or power off The dialed party’s phone is out of the service area or turned off.
Driving mode The dialed party’s phone is in Drive Mode.
Select on for Call ID Notification
The Caller ID is not notified.
(when dialing V live or visual nets)
Your call is being forwarded When forwarding.
Failed to connect
Re-dial with “Notify Caller ID” set to “ON”.
・
The message might be displayed in cases other than the above.