Docomo Foma P700i, Руководство пользователя, Страница: 184 / 565

181
Camera
Function menu
Edit title
Result
Delete this
Delete all
Operations
Enter the title
●
You can enter up to 9 full-pitch or 18 half-pitch characters.
●
See page 482 for how to enter characters.
You can bring up the Result display of read code for stored data.
YES
●
To cancel, select “NO” and press .
Enter the Terminal Security Code YES
●
To cancel, select “NO” and press .
●
See page 140 for the Terminal Security Code.
<Text Reader>
Using Text Reader
You can scan printed phone numbers, mail addresses or alphanumeric such as URLs using the outside
camera, and store them as text information. Use the text information to make calls, compose i-mode mail,
or connect to the Internet.
■
When scanning with the text reader
• Slide the close-up lever to “ ” and start scanning.
• Scan characters with the camera about seven cm away from them.
The scanning rate is lowered if you scan text off the position about seven cm.
• Scan so that the camera is in parallel with the characters.
• Scan so that the characters will be in the reading range.
• After scanning, slide the close-up lever back to “ ”.
• See page 170 for the close-up mode.
Reading range
You can store eight scanned data items of up to 256 half-pitch characters per item. The number of
characters you can scan at a time is up to 50 half-pitch characters. Split a lengthy text for reading.
Text reader Scan text
●
Select from the Shortcut menu and press ; then the display on the right is also brought up.
●
Select “Text reader” of “CHG camera-mode” from the Function menu while the Finder display is
displayed and press ; then the display on the right is also brought up.
●
When eight codes have already been stored, the confirmation display appears asking whether to
overwrite the oldest code. To overwrite, select “YES” and press .
To cancel, select “NO” and press .
1
Reading Text At Text Reader start-up
Photo light ·······OFF
<Text Reader Selection display>
Switch to the close-up mode and fit the characters to be scanned to
the reading range and display them.
●
Press ( /
)
to set the photo light to “ON” or “OFF”.
2
<Reading Text display>