Docomo Foma P700i, Руководство пользователя

Страница: 425 / 565

422
Other
Useful
Functions
Receiving Calls Using Flat-plug Earphone/Microphone Set with Switch
During ringing Press the switch of the Flat-plug Earphone/Microphone Set with
Switch
A beep sounds and you are connected.
With the video-phone call, a substitute image is sent to the other party. You can switch between the substitute image and the
image through your camera by pressing during a video-phone call.
●
You can use the Set with the FOMA phone closed.
●
You can take calls also by operating the FOMA phone.
●
When “Automatic answer” is set to “ON”, a call is answered automatically after the ringing time elapsed.
1
When you end talking, press and hold the switch of the Flat-plug
Earphone/Microphone Set with Switch for at least one second to disconnect.
A beep sounds twice and you are disconnected.
2
●
Use “Earphone” so that you can set the beep not to sound from the speaker when the Flat-plug Earphone/Microphone Set with Switch
is connected.
●
If you set “Ring volume” to “Silent” or during Manner Mode, the ring tone does not sound. However, if you set “Original” for Manner
Mode and the ring volume specified by that mode is set to other than “Silent”, the ring tone will sound.
●
Regardless of the setting for “Keypad sound”, a tone for connecting and disconnecting the line sounds.
●
Note that you might be connected if you try to connect the Flat-plug Earphone/Microphone Set with Switch after the ring tone sounds.
●
To release answer hold, press the switch of the Flat-plug Earphone/Microphone Set with Switch. (When a video-phone call is placed
in answer hold, a substitute image is sent and the video-phone call starts.)
●
You cannot press the switch of the Flat-plug Earphone/Microphone Set with Switch instead of pressing during a call. Note that
you will be disconnected if you press and hold the switch for at least one second.
●
Do not press or release the switch of the Flat-plug Earphone/Microphone Set with Switch in succession. You might be automatically
connected.
● If you have signed up for “Call Waiting Service” and “Multi calling” is displayed during a call, you can switch two calls by pressing and
holding the switch of the Flat-plug Earphone/Microphone Set with Switch for at least one second. You cannot, however, use the
switch to end the call.
●
You can adjust the earpiece volume by pressing (raise) or (lower) during a call.
●
“Automatic answer” is enabled even if you disconnect the Flat-plug Earphone/Microphone Set with Switch while ringing.
●
Whether sound comes out from the speaker or not when you switch to Hands-free while the Flat-plug Earphone/Microphone Set with
Switch is connected depends on the setting for “Earphone”.
Information
<Automatic Answer>
Answering a Call Automatically when Earphone is Connected
If a call comes in while the Flat-plug Earphone/Microphone Set with
Switch (option) is connected, you can automatically answer the call
after the specified ringing time elapses.
External option Automatic answer
ON··············Sets Automatic Answer.
OFF············Does not set Automatic Answer. The setting is completed.
1
Enter a ringing time (seconds).
●
Enter from “001” through “120” in three digits.
●
Not to change the specified ringing time, press without entering the ringing time.
●
You cannot set the same ringing (response) time for Remote Observation, Automatic Answer and Record Message. Set
different times for each.
2
Setting at purchase
Automatic answer ·······OFF
Ringing time ················6 seconds (when ON)