Docomo Foma P700i, Руководство пользователя

Страница: 51 / 565

48
Making
Calls/Receiving
Calls
Enter the other party’s phone number, starting with the area code.
●
Even when you are dialing within the same area, you need to enter the area code before the phone
number.
<Example>
Area code City code Phone number
●
To make calls to mobile phone
Other party’s phone number (11 digits)
●
To make calls to PHS
Other party’s phone number (11 digits)
●
To store an entered phone number in the Phonebook, press ( ) . Go to step 2 on page 97.
070
−
XXXX
−
XXXX
090
−
XXXX
−
XXXX
080
−
XXXX
−
XXXX
XXXX XXXX 03
1
You can start talking when the other party answers.
●
The FOMA phone differs from ordinary phones in making a transmission signal before the call signal.
●
“ ” blinks at the upper right of the display during calling, and lights steadily once you are connected.
● You can also dial out by entering the phone number and then pressing .
●
You will hear a message to the effect that your call cannot be connected when the destination mobile
phone or PHS is not turned on or the radio waves do not reach.
●
If you hear a message requesting your Caller ID (see page 433), follow the procedure for “To notify the
Caller ID” (see page 46) to enter “186” or “
:
31#” and redial the number.
● When the dialed party is on the phone, you will hear the busy signal. Press and wait a while before dialing again.
●
You can press the numeric keys to send touch-tone signals during a call.
●
If you close the FOMA phone during a call, the FOMA phone works according to “Fold setting”. (See page 62)
●
If date and time have already been set, the current time is displayed on the “Talking” display.
2
To end the call, press .
3
●
You can make voice calls using “Multiaccess” even when using i-mode or exchanging mail.
●
You cannot make voice calls during 64K data transmission or video-phone calls.
●
If you have brought up a display other than the “Talking” display during a call, you can return to the “Talking” display by pressing
several times. You can end the call by pressing from the “Talking” display.
●
Internal phones and other phones that do not support the entry of area codes cannot be used for dialing to the FOMA phones.
●
You can also dial out by pressing and then entering the party’s phone number. If you make a mistake when entering the
phone number, press and then enter the number again after the wrong number is cleared.
●
You cannot dial out by entering the phone number while “Keypad dial lock”, “Restrict dialing” or “Self mode” is activated.
●
You can make calls using a Flat-plug Earphone/Microphone Set with Switch (option). (See page 421)
Information
Making a Call