Docomo Foma P700i, Руководство пользователя

Страница: 147 / 565

144
Safety
Settings
■
Operating PIN1 code, PIN2 code, and PUK (PIN unblock code)
“PIN1 code” and “PIN2 code” in the UIM are set to “0000” at the time of contract but you can change them. If you enter a wrong PIN1
code/PIN2 code 3 times in succession, they are automatically locked. Note that you keep a separate record of the set codes just in
case you forget them.
“PIN unblock code” is the number for releasing the “PIN1 code” and “PIN2 code” lock setting.
Enter “PIN unblock code” to release the lock setting.
If you enter a wrong “PIN unblock code” 10 times in succession, it is automatically locked. Note that you keep a separate record of
the “PIN unblock code” just in case you forget it.
●
Note that if you do not remember the PIN unblock code or when the UIM is completely locked, you need to bring that the FOMA
phone, UIM and an identification card such as a driver’s license to a DoCoMo shop counter.
Set new PIN code
Consult a DoCoMo
shop counter
Enter PUK (PIN
unblock code)
Enter PIN2 code
Enter PIN1 code
Wrong entry 3 times
in succession
Wrong entry 10 times in
succession
Entry OK
Security when the power
turns on
Operation of user
certificate
Connecting to FirstPass
sites
Lock/Security All lock Enter the Terminal Security Code
“ ” and “All lock” appear and All Lock is set.
●
See page 140 for the Terminal Security Code.
●
To release All Lock, enter the Terminal Security Code and press from the Stand-by display.
1
If you set All Lock, you can do no operations other than turning the power ON/OFF.
<All Lock>
Setting at purchase
Released
Locking your Phone to Prevent Use by Others
●
You cannot make calls during All Lock. However, you can dial emergency phone numbers 110, 119, and 118. Select “YES” from the
display asking whether you dial and press . To cancel, press “NO” and .
●
You cannot take calls during All Lock. However, “Remote observation” is enabled.
●
All Lock will not be released even if you turn the power off.
●
If you fail to release All Lock five times in succession, the power to the FOMA phone turns off. However, you can turn the power on
again.
●
You cannot set while another function is working (while “ ” or “ ” is displayed at the upper right of the display).
●
You can receive mail or Messages R/F during All Lock; however the Receiving or Reception Result display for incoming mail and
Messages R/F does not appear. The icons such as “ ”, “ ”, or “ ” appear after All Lock is released.
● Even if a call comes in during All Lock, the call is not received and the caller hears a busy tone. After releasing All Lock, the “Missed
call” icon appears.
●
During All Lock, an alarm for “Alarm”, “Schedule”, and “ToDo” does not sound at the specified time. After releasing All Lock, the
“Missed alarm” icon appears on the Stand-by display in the same way as when the alarm does not sound. (See page 402)
However, for “Alarm”, if you turn off the power during All Lock, the power does not turn on when the specified time arrives and the
“Missed alarm” icon does not appear.
●
During All Lock, i-
α
ppli does not auto-launch even when the time specified by “Auto start time” arrives. After releasing All Lock, the
“Not run soft” icon appears.
●
If you have pasted an icon to the desktop, the icon disappears by setting All Lock. When All Lock is released, the icon reappears.
●
If you set All Lock while “ ”, “ ”, and “ ” are displayed, these icons will not be displayed. When All Lock is released, the icons
reappear.
Information
●
You can dial emergency phone numbers 110/119/118 from the PUK Entry display.
Information