Docomo Foma P700i, Руководство пользователя

Страница: 328 / 565

325
i-
α
ppli
●
Software does not start automatically in the following cases:
• The FOMA phone is switched off
• The date and time are not set
• Another task is running
• You are on the phone
• During All Lock or PIM Lock
• The time set for automatic start is identical to the time set for “Software update”, or an alarm of “Alarm”, “Schedule” or “ToDo”
●
If automatic start fails, “ ” appears on the desktop; when you select this icon, the message “Not run soft” is displayed. Select the
icon and press to bring up the Auto Start Info display.
●
The failure of automatic start, which occurs during i-mode or when another software is running, is also recorded.
Information
<i-
α
ppli Stand-by Display>
Operating i-
α
ppli Stand-by Display
Software Setting (Stand-by Setting)
You can set i-
α
ppli for the Stand-by display. Once set, the i-
α
ppli Stand-by display automatically appears
each time you bring up the Stand-by display.
Software list ( ) Software setting
“ ” appears for the software set as the Stand-by display.
1
■
To operate i-
α
ppli as a normal i-
α
ppli while an i-
α
ppli Stand-by display is running
From the i-
α
ppli Stand-by display, press .
“ ” or “ ” changes to a blinking “ ” or “ ” and you can operate the i-
α
ppli normally.
●
To return to the i-
α
ppli Stand-by display, press and hold for at least one second; you can also press
, select “Ended” and press . To cancel the i-
α
ppli Stand-by display, select “Terminated”, press
, select “YES” and then press .
Stand-by set
ON··············Sets the i-
α
ppli Stand-by display.
OFF············Cancels the i-
α
ppli Stand-by display.
“ ” or “ ” is displayed while an i-
α
ppli Stand-by display is running.
●
To cancel starting the software, select “Cancel” and press .
2
●
With some software programs set as the i-
α
ppli Stand-by display, you can press a key to go from the normal i-
α
ppli status to the
i-
α
ppli Stand-by display status. However, you cannot return to the i-
α
ppli Stand-by display if other menu functions are operating.
Information
●
If you turn off the FOMA phone while the i-
α
ppli Stand-by display is running, the confirmation display appears asking whether to
launch i-
α
ppli when you turn on the power again. Select “YES” or “NO” and press .
●
You can set only one software program for the i-
α
ppli Stand-by display.
●
Some i-
α
ppli cannot be set for the Stand-by display.
●
Note that you might not be able to receive timely information if you have set “Software setting (Stand-by net)” to “OFF”.
●
If the software set for the i-
α
ppli Stand-by display connects to the network, it might not operate successfully because of radio wave
conditions.
●
When the i-
α
ppli Stand-by display is activated, the image set for “Stand-by display” of “Display setting” will not be displayed.
●
When you bring up the Stand-by display while a menu function is operating, the image set for “Stand-by display” of “Display setting”
will be displayed, even when the i-
α
ppli Stand-by display is set.
●
You cannot use the Web To function from the i-
α
ppli Stand-by display.
●
If you set All Lock or PIM Lock while the i-
α
ppli Stand-by display is running, the i-
α
ppli Stand-by display will end. If you set All Lock,
the image set for “Stand-by display” of “Display setting” will be displayed and if you set PIM Lock, the Stand-by display at purchase
will be displayed. The i-
α
ppli Stand-by display will return when you cancel All Lock or PIM Lock.
Information