Docomo Foma P700i, Руководство пользователя

Страница: 39 / 565

36
Confirming
before
Use
Using the UIM (FOMA Card)
The UIM is an IC card that holds your information such as phone numbers. It can also hold data such as
the Phonebook entries and Short Messages (SMS).
By replacing the UIM, you can operate multiple FOMA phones for multiple purposes.
You cannot use the FOMA phone for voice and video-phone calls, i-mode, mail or packet transmission
unless the UIM is inserted.
You can set two security codes, PIN1 code and PIN2 code, for the UIM. (See page 141)
Refer to the UIM manual for details about how to use it.
When inserting or removing the UIM, take care not to accidentally touch or scratch the IC.
Insert/Remove UIM (FOMA Card)
You need to remove the battery before you insert the UIM. (See page 39)
■
Inserting
Pull the claw to pull the tray
out.
●
Pull it out straight until the tray stops.
1
Push the tray inwards.
●
Push it until it clicks.
3
Follow step 1 of “Inserting” to pull out the tray
and remove the UIM
.
1
Place the UIM on the tray
with its IC-side facing up.
●
Fit the cut corners of the UIM and
tray in place.
2
Claw
Cut corner
IC-side is faced up
■
If the tray is disengaged
Fit and push it straight into
the guide rail.
■
Removing
● Before inserting or removing the UIM, turn off the power and close the FOMA phone.
●
Make sure that the tray for the UIM is not drawn out when attaching the battery. If the tray is drawn out, the battery cannot be
attached. Note that if the battery is forcibly attached, the UIM or tray may be damaged.
●
Take care not to force the UIM into place because this can break it.
●
Take care not to lose the UIM once you remove it.
Information