Docomo FOMA N601i, Руководство пользователя, Страница: 69 / 469

66 Making/Receiving Phone Calls
2
f
or
g
X
d
■ To set step tones (getting a ring tone louder gradually)
X In “Level 6”, press
f
When you receive a call with “Step” set, there is no ring tone for 3 seconds, then the ring tone becomes
gradually louder, starting at “Level 1” and increasing to “Level 6”.
■ To set a silent ring tone
X In “Level 1”, press
g
When the silent ring tone is set, a FOMA terminal emits no ring tone.
An icon appears on the standby screen to show that the “Silent” ring tone is set.
: Appears when “Silent” is set for one or more of “Phone” and “Videophone” calls.
： Appears when “Silent” is set for one or more of “Mail”, “Chat mail”, “MessageR” and “MessageF”.
: Appears when both “ ” and “ ” are set.
e
The ring volume specified in “Phone” in this function is also applied to “Select ring tone” for voice calls and the
alarm tones for “Schedule” and “To Do list”.
<Answer hold>
Putting Calls on Hold When You Cannot Answer Immediately
When a FOMA terminal rings for a voice or videophone call and you cannot answer it right away, use
this procedure to put the call on hold and have the caller wait briefly.
1
You are receiving a call
X
y
The FOMA terminal makes three rapid beeps and puts the call on hold.
The caller hears a message saying that you cannot answer at the moment and holds the
call without hanging up.
You can set the message played while a call is held in “Set hold tone”.
■ To hang up while a call is on hold
X
y
■ If a caller hangs up while on hold
The call ends.
2
Press
r
or
d
to resume the call
When “Answer setting” is set to “Any key answer”, you can also answer the call by pressing
0
to
9
,
w
,
t
,
b
,
o
or
a
(
@
). Furthermore, pressing
s
(MEMO/CHECK),
q
or
p
also enables you to answer
the call.
For videophone calls
→
p.81
e
Call charges apply to a caller while he or she is waiting for you to answer.
e If “Phone” or “Videophone” in “Ring volume” is set to “Silent” or a FOMA terminal is in Manner mode, the FOMA
terminal does not make the three short beeps when you activate answer hold. However, the beeps do sound when
“Manner mode set” is set to “Original” in which “Phone vol.” is not “Silent”.
e
If you have subscribed to the “Voice Mail” or “Call Forwarding” service, selecting “Voice Mail” or “Call Forwarding”
from the function menu when you are receiving a call either forwards the call to the Voice Mail service center or
forwarding number.
<Set hold tone>
Setting the Hold Tone
Set the message given to the other party when you put a voice or videophone call on answer hold or
put an ongoing call on hold.
1
i
X
“Settings”
X
“Talk”
X
“Set hold tone”
X
Select any item
NOTE
NOTE
Default setting On hold tone: Tone 1 Holding tone: Melody 1
５ｓ
［Ｏｎ ｈｏｌｄ］