Docomo FOMA N601i, Руководство пользователя, Страница: 459 / 469

53
ATS10= n
[&F][&W]
Automatic disconnection
delay time setting.
(1/10 second) This command can be set but cannot be
operated. ATS10=1
OK
ATS10?
001
OK
ATS10=?
ERROR
ATS30= n
[&F]
Disconnects the line when
there is no user data
exchange for the time set in
this command. n = 0 : Inactive timer off (initial value)
n = 0 - 255
Where
n
is the number of minutes.
ATS30=0
OK
ATS30?
000
OK
ATS30=?
ERROR
ATS103= n
[&F]
Sets the called subaddress
character. n = 0 : ＊
n
= 1
：
/ (initial value)
n = 2 ： ¥ (¥ mark or back slash)
ATS103=0
OK
ATS103?
000
OK
ATS103=?
ERROR
ATS104= n
[&F]
Sets the calling subaddress
character. n = 0 : #
n = 1 : % (initial value)
n = 2 : &
ATS104=0
OK
ATS104?
000
OK
ATS104=?
ERROR
ATV n
[&F] [&W]
Specifies whether the result
code is returned in
numerals or alphabets. n = 0 : Returns the result code in numeral
value.
n = 1 : Returns the result code in
characters (initial value).
ATV1
OK
ATX
n
[&F] [&W]
Specifies whether the
speed indication is present
in the CONNECT display
when connecting the line.
Also detects a busy tone or
a dial tone.
n
= 0 : Without dial tone detection; without
busy tone detection; without speed
display.
n
= 1 : Without dial tone detection; without
busy tone detection; with speed
display.
n
= 2 : With dial tone detection; without
busy tone detection; with speed
display.
n
= 3 : Without dial tone detection; with
busy tone detection; with speed
display.
n
= 4 : With dial tone detection; with busy
tone detection; with speed display.
(initial value)
ATX1
OK
ATZ Resets the current setting
to the contents of the non-
volatile memory.
If this command is input
during communication, the
line will be disconnected.
−
(Online command
mode)
ATZ
NO CARRIER
(Offline command
mode)
ATZ
OK
+++ In response to the escape
sequence, the online data
mode changes to the online
command mode while
maintaining the line
connection. − (Online data mode)
+++ (No display)
OK
AT command Outline Parameter/description Command execution example