Docomo FOMA N601i, Руководство пользователя, Страница: 426 / 469

20
Easy settings: “Settings for Packet communication using
other providers”
1
Click “
かんたん設定
” (Easy settings)
2
Select “ パケット通信 ” (Packet communication) and click “ 次へ ” (Next)
3
Select “ その他 ” (Other) and click “ 次へ ” (Next)
4
Click “OK”
The access point (APN) settings will be obtained from the FOMA terminal which is connected to the
PC.
Wait for a while.
5
Specify the packet
communication settings
After the terminal setting is completely
acquired, the screen “
パケット通信設定 ”
(Packet communication setting) appears.
Enter any name in “
接続名 ” (Connection name).
You cannot use the following reserved
characters: ¥/:
＊ ?!<> │ (half-pitch only).
Select whether to notify the caller ID for dial-up
connection.
APN:mopera.net is specified for the mopera U
connection and APN:mopera.ne.jp for the
mopera connection by default in “
接続先
（ APN ）の選択 ” (Select the access point
(APN)).
Follow the information directions provided by
the internet service provider for the caller ID settings.
6
Click “
接続先（
APN
）設定
”
(Specify the access point (APN))
As the APN of mopera “mopera.ne.jp” is
assigned to cid1 and APN of mopera U
“mopera.net” to cid3 by default, assign the APN
to cid2 or between cid4 to cid10.
Open the “
接続先（ APN ）の追加 ” (Add the
access point (APN)) screen by clicking the “
追
加 ” (Add) button, select the connection method,
specify an access point name that supports
FOMA packet communication and click “OK”.
The “
接続先（ APN ）設定 ” (Specify the access
point (APN)) screen reappears.
Half-pitch alphanumeric characters, hyphen (-)
and dots (.) can only be entered for the access
point.
7
Select the Access point (APN) and click “OK”
The screen of Step 5 reappears.
The access point (APN) entered in Step 6 is displayed on “
接続先（ APN ）の選択 ” (Select the access
point (APN)).