Docomo FOMA N601i, Руководство пользователя, Страница: 319 / 469

316 Network Services
e
If you insert a different FOMA card, the Multi Number
settings (names, numbers, ring tones, etc.) registered
to the FOMA terminal may be erased. In this case,
register again.
<Number Setting>
e
The name is displayed when you specify the Multi Number
settings and select a phone number used for a call.
<Select ring tone>
e
When the ring tone settings are duplicated, the
priority sequence will be assigned.
→ p.114
Function menu (Multi Number setting screen)
Switching phone number
each time making a call
When making a call, you can select a phone
number to be used for the call.
1
Phone number entry screen (p.46)
X
p
(FUNC) X “Multi Number”
X
Select any item
* ： The respective registered names are displayed if they
are set.
e
You can also switch phone number using the
procedures above from the function menu of
Phonebook detail, Redial/Dialed/Received calls
details screen.
e When the detail screen of Redial, Dialed calls and
Received calls shows the Multi Number register name
(“Basic Number” or register name of Additional Number1
or Additional Number2) and you would like to make a call
using the different number from the displayed Multi
Number register name, select any item to be called from
“Multi Number” on the function menu.
OFFICEED
“OFFICEED” is a flat-rate group service
provided by the specified IMCS (indoor mobile
communication system). You need to separately
subscribe to the services. For more details, see
DoCoMo corporate website
(http://www.docomo.biz/d/212/) (Japanese only).
<Additional service>
Adding and Using Services
When DoCoMo provides new and additional
network services, this function enables you to
add those services onto your FOMA terminal.
Adding additional service
and response message
1
i
X “Service” X “Additional
service”
X
Select any item
NOTE
Edit Sets an additional number.
Delete this Deletes the highlighted additional
number.
Delete all Deletes all the registered additional
numbers.
Basic
Number Sets your contracted number (Basic
Number) to be used for making a call.
Additional
Number1
*
Sets the additional number to be used for
making a call.
Additional
Number2
*
Cancel
number Cancels the setting to restore the “Set
Multi Number” setting.
NOTE
Additional
service X Highlight “<Not stored>” and
p
(FUNC) X “Add new service”
X Enter a service name
Adds a new service.
A service name can contain up to 10
double-byte or 20 single-byte
characters.
a
The Add new service function
menu displayed when you select
“Additional service”
→ p.317
• Enter number X Enter a number X “YES”
Uses the number to connect. The
number can contain up to 20 digits.
• Enter USSD
number
X Enter a code X “YES”
Uses the service code to connect.
The code can contain up to 40
digits.
Additional
guidance X Highlight “<Not stored>” and
press
p
(FUNC) X “Add new
guidance” X Enter a command X
Enter a response message X
“YES”
Stores response messages for
commands posted from the network
when using the service code
(USSD) to access an added service.
A command can contain up to 20
digits. A message can contain up to
10 double-byte or 20 single-byte
characters.
a
The Additional guidance function
menu displayed when you select
“Additional guidance”
→ p.317
Subscription
Required