Docomo FOMA N601i, Руководство пользователя, Страница: 453 / 469

47
AT+CBST
[&F] [&W]
Changes the bearer service
type. Format: AT+CBST=< n >,1,0
n =116
：
64,000bps (bit transparent) (initial
value)
n =131 ： 32,000bps (multimedia)
n =134
：
64,000bps (multimedia)
AT+CBST=134,1,0
OK
AT+CBST?
+CBST:134,1,0
OK
AT+CBST=?
+CBST:(116,131,134),
(1),(0)
OK
AT+CEER Displays the reason for
disconnection of the
previous call. Result: +CEER:<report>
report: List of disconnection reasons (p.58). AT+CEER
+CEER:36
OK
AT+CGDCONT Sets the access point name
(APN) for packet
origination. p.54 p.54
AT+CGEQMIN Registers a criterion to be
used to decide whether or
not to allow the QoS (quality
of service) that is informed
from the network side when
PPP packet communication
is established. p.54 p.54
AT+CGEQREQ Sets the QoS (quality of
service) to be requested to
network when originating a
PPP packet communication. p.55 p.55
AT+CGMR Displays the version of the
FOMA terminal.
−
AT+CGMR
12345xxxxxxxxxxx
OK
AT+CGREG=
n
[&F] [&W]
Specifies whether to notify
the network registration
condition.
The returned notification
displays whether you are
inside or out of service.
n
= 0 : Not informed (initial value).
n
= 1 : Informed.
Informed when switching between
“Inside the service area” and “Outside
the service area” is completed.
AT+CGREG?
：
Displays the current setting.
+CGREG
：
< n > , <stat>
n : Set value
stat
：
0: Out of packet area
1: Within packet area
4: Unknown
5: Within packet area
AT+CGREG=1
OK (Set to informed)
AT+CGREG?
+CGREG: 1,0
OK
AT+CGREG=?
+CGREG: (0,1)
OK
(Outside the service area)
(When you move from
“outside the service
area” to “inside the
service area”.)
+CGREG:1
AT+CGSN Displays the product
number of the FOMA
terminal.
−
AT+CGSN
12345xxxxxxxxxxx
OK
AT+CLIP=
n
[&F] [&W]
Displays the other party’s
Caller ID on a PC when a
64K data communication
call is received.
n
= 0 : Not display the result (initial value)
n
= 1 : Display the result
AT+CLIP?
：
Displays the current setting.
+CLIP: n , m
m
= 0 : NW setting not notifying the other
party of the Caller ID in outgoing
call.
m
= 1 : NW setting notifying the other party
of the Caller ID in outgoing call.
m
= 2 : Unknown
AT+CLIP=0
OK
AT+CLIP=?
+CLIP:(0,1)
OK
(A call is received
when +CLIP=1 is set)
RING
+CLIP:
“090XXXXXXXX”,177,
“123”,136
AT command Outline Parameter/description Command execution example