Docomo FOMA N601i, Руководство пользователя, Страница: 281 / 469

278 Display/Edit/Organization
Note on transferring data
Before data transfer
c
You cannot transfer data while another function
is running. Exit all other functions before
transferring. You cannot run another function
while transferring data.
c
You cannot transfer data while Dial lock, Self
mode or Omakase Lock is set.
c
You cannot receive data stored in the phonebook
while “Restrict dialing” is set. However, you can
send data with “Restrict dialing” and data in “My
Profile”.
c
Whether you can transfer data may depend on
the status of the other party’s FOMA terminal. If
you transfer with the terminal whose model is
different from yours, it may not reflect the
settings of received messages or bookmark
folder tree, or may not receive a Deco-mail
message correctly.
c
The data transfer function via infrared data
exchange or cable connection conforms to the
IrMC1.1 standard. You may be unable to exchange
data with the terminal or a PC that does not conform
to IrMC1.1. Some data may not be transferred
correctly even if the terminal or application of the
other party conforms to IrMC1.1.
c
When transferring a still image, melody, movie/
i-motion via cable connection, which does not
comply with IrMC, you need the transferring
software compatible with FOMA N601i.
c
You may be unable to transfer data via infrared
data exchange if the FOMA USB Cable
(optional) is connected.
During data transfer
c
The FOMA terminal is out of range, which means
that you cannot make/receive a voice call/
videophone call/use i-mode, i-mode mail, packet
communication or 64K data communication.
However, the FOMA terminal may receive an
incoming call or message immediately after
starting data transfer. In this case, the transfer will
be canceled. After the transfer is finished, the out
of range status may continue for a while.
c
Infrared data exchange will be canceled and a
message appears asking whether to continue
the communication when:
a
The receiving device does not receive data
within 30 seconds or so
a
The sending device cannot find the receiving
device
Select “YES” to retry the communication. Select
“NO” to cancel the communication.
If you do not select “YES” or “NO” within 30
seconds or so, the infrared data exchange will be
automatically finished.
c
It may take long to transfer a large amount of
data. The receiving device may be unable to
receive a large amount of data. It may take long to
transfer the phonebook because stored images
are also transferred. To shorten the sending time,
you can set “Forwarding image” to “OFF”, so that
images stored in the phonebook are not
transferred.
Data to be transferred
c
Data received by the FOMA terminal are saved
as follows:
■ Important
c Ensure that the FOMA terminal and a PC are
properly connected. An improper connection may
not only prevent data transfer but may also result
in data loss. Install the N601i communication
setting file (driver).
→ p.321
c
Attempting to transfer data with the FOMA
terminal’s battery low or empty may not only
prevent data transfer but may also result in data
loss. Make sure that the FOMA terminal’s battery
is fully charged. Also check the PC’s power.
c
All data on the FOMA terminal may be deleted if
an error occurs while transferring all from a PC to
the FOMA terminal. Before transferring all, check
the cable connection, the FOMA terminal’s battery
level and the PC’s power.
Data Destination/Order
Still image/
image The first in the Inbox folder.
Movie/
i-motion
Melody
Phonebook,
My Profile The lowest memory number available
between “010” and “699”. If none of the
numbers above is available, it is saved
under the lowest memory number
available between “000” and “009”.
Schedule In date order of received schedules.
To Do list The first in the To Do list.
Received
mail (Receive
one) The Inbox folder in date
order of received
messages.
(Receive all) User-created folders or
Trash box folder
according to the folder
tree on the sender.