Docomo FOMA N601i, Руководство пользователя

Страница: 301 / 469

298 Other Useful Functions
1
i
X “Settings” X “Call time/
Charge”
X
“Notice designate calls”
X Enter your security code
2
Set the respective parameters
3
o
(Finish)
e
The alarm volume applied while in original manner
mode is the same as that specified in “Phone vol.”
under “Original”.
e The charges for i-mode and packet communication
and Chaku-moji transmission are not supported by
this function. To check i-mode communication
charges, see the “Mobile Phone User’s Guide [i-
mode]” you received at the time of contract.
d
Alarm actions
When the accumulated charge exceeds the cost
limit after a call, you are notified as follows:
■ When Notify cost limit is set
to “ON” and Alarm tone is
set to other than “OFF”
When the accumulated charge
exceeds the preset cost limit, the
alarm starts sounding in three
seconds after you finished talking
and lasts about five minutes, which opens the
screen notifying that the accumulated charge has
exceeded the limit. To stop the alarm tone, press any
key. After the alarm, pressing
t
or
y
shows the
“ ” (Notice designate calls) desktop icon on the
standby screen.
■
When Notify cost limit is set to “ON” and
Alarm tone is set to “OFF”
When the accumulated charge exceeds the preset
cost limit, the “ ” (Notice designate calls) desktop
icon appears on the standby screen.
d
Checking the details of “ ”
(Notice designate calls)
Selecting the “ ” (Notice designate calls)
desktop icon on the standby screen shows the
details of Notice designate calls.
1
On the standby screen
X
d
X
“ ”
X
Enter your security code
The alarm information on “Notice
designate calls” is shown.
2
Check the details
X
d
The standby screen reappears and the “ ”
(Notice designate calls) desktop icon disappears.
e
The “ ” (Notice designate calls) desktop icon
disappears if the cost limit is changed to the one
exceeding the current total calls cost in “Cost limit
setting”.
e
If you set the cost limit for the first time to a value lower
than the total calls cost and make or receive a call, the
alarm of Notice designate calls sounds when you end
the call.
e
You can choose the alarm mode between “Operation
preferred” or “Alarm preferred” in “Alarm setting”.
<Calculator>
MENU85
Using a FOMA Terminal as
a Calculator
A FOMA terminal performs four basic arithmetic
operations (
＋
(addition),
−
(subtraction),
×
(multiplication), ÷ (division)).
c
Up to 10-digit number and up to nine decimal
places can be shown.
c A result number consisting of more than 10
figures appears with “.E”.
1
i
X
“LifeKit”
X
“Calculator”
X
Calculate
The entered numbers and calculation result
appear.
Cost limit
setting Sets the cost limit between
￥
10 and
￥
100,000 by
￥
10.
Notify setting
• Notify cost
limit
Specifies whether to give an alarm
when the cost limit is exceeded.
Setting “OFF” does not given an
alarm.
Setting “ON” gives an alarm following the
settings of “Alarm tone” and “Volume”.
• Alarm tone Selects an alarm tone. If you have
created folders, they appear after the
“Pre-installed” option.
“Changing the Ring Tone”
→
p.112
• Inbox Selects a melody downloaded from an
i-mode site or website as a ring tone.
• Pre-
installed
Selects an alarm tone from the pre-
installed ring tones and melodies.
• Voice
announce
Selects “Voice announce 1” or “Voice
announce 2” for an alarm tone.
“Recording and Playing Alarm Tones
and On Hold Tones”
→
p.296
• OFF Does not sound an alarm.
• Volume Use
c
to set the alarm tone volume.
“Adjusting the Ring Volume”
→
p.65
NOTE
Ｃｏｓｔ ｌｉｍｉｔ
Ｄａｔｅ
Ｓｅｔ−ｕｐ ｃｏｓｔ ｌｉｍｉｔ
ｉｓ ｅｘｃｅｅｄｅｄ
２／13 １１：５０
￥３０００
NOTE
Ｎｏｔｉｃｅ ｄｅｓｉｇｎａｔｅ ｃａｌｌｓ