TYPE
TYPE
SERIAL
POWER
VOLTAGE
FREQUENCY
INTENSITY
FABRICATION
YEAR
WEIGHT
MAXI TOOL
BORE
SPEED
MANUFACTURER
MASSE UTILE
Kg
mm
mm
Ø MAXI OUTIL.
Ø ALESAGE
T/MN - RPM
N° SERIE
ANNEE DE
FABRICATION
PUISSANCE
kW
Hz
V
A
PLAGE DE
TENSION
FREQUENCE
INT. UTIL.
Instruction plate
English
14
3
Description of the machine
[FIG. 1]
• Depth of cut : 230 mm Ø 625
• Nominal weight (empty) :
310 to 340 kg (depending on version)
• Operating weight :
370 to 410 kg (depending on version)
• Dimensions (L x W x H) : 1460 x 800 x 1150 mm
• Blade shaft RPM : 1900
• Blade : Ø 450 to 625 mm
• Tank : 60 litres (25 minutes of use)
2
Technical specifications
• Use : sawing of fresh or old concrete and
coated materials (asphalt).
• Tools : Diamond Blades - Water cooled
Ø
x
625
x
mm - Bore 25.4 mm, right
Ø
x
625
x
mm - Bore 25.4 mm, left
(Information from your usual DIMAS sup-
plier)
1
Use
Switch off the disk prior to moving
the machine on jobsite.
Remove the disk prior to hoisting,
loading, unloading and transporting
the machine on jobsite.
SPECIAL INSTRUCTIONS
The disc cutter is designed to provide safe
and reliable service in operating conditions
corresponding with the instructions, but it
can present dangers for the user and risks
of damage, consequently regular on site
inspection is necessary to ensure :
• Perfect technical condition (use for the
purpose for which it is intended and
taking into account any risks, and cor-
rection of any malfunction detrimental
to safety).
• Use a diamond disk for cutting with
water (sawing new or old concrete, tar-
mac or asphalt). No other type of disk is
allowed (abrasive, saw, etc . . .).
• Competent staff (qualifications, age,
training) who have read and understood
the manual in detail before starting
work: any electrical, mechanical or
other problem should be investigated
by a qualified maintenance engineer
(electrician, maintenance manager,
approved dealer, etc . . .).
• That the warnings and instructions mar-
ked on the machine are followed (ade-
quate personal protection, correct use,
general safety instructions, etc).
• That no modification, transformation or
addition is detrimental to safety and that
it is carried out without prior authoriza-
tion from the manufacturer.
• Respect of the maintenance intervals
and periodical checks recommended.
• That only genuine spare parts are used
for repairs.
FAILURE TO COMPLY
WITH
THESE
WARNINGS
COULD
RESULT IN DEATH OR SERIOUS
BODILY INJURY.
1 - Steering column
2 - Speed control
3 - Column
4 - Water inlet vale
5A - Disk casing, right
5B - Disk casing, left
6A - Right-hand housing guard
6B - Left-hand housing guard
7 - Front guide
8 - Depth indicator
9 - Motor
10 - Belt guard
11 - Belt casing (5B)
12 - Belt tension
13 - Tank
14 - Water tank drain (8 minutes)
15 - Mains water inlet
16 - Fuel tank
17 - Emergency stop
18 - Block (shaft)
19 - Battery isolation switch
20 - Starting switch
AUTOMATIC ADVANCE
21 - Controller
22 - Control light
23 - Potentiometer
24 - Emergency stop
25 - Clutch lever
26 - Locking lever
HYDRAULIC LOWERING MECHANISM
27 - Handle
28 - Central hydraulic tank
4
Handling - Transport
(blade dismantled)
• For positioning the saw on site, it is suffi-
cient to push it. It moves easily on its four
wheels, without switching on the motor.
• Parking brake : release the locking lever
(25) (see Fig. 1) to engage forward motion.
DO
carefully read and understand all the
instructions before operating the saw.
DO
always keep all guards in place.
DO
aways wear safety approved hearing,
eye, head and respiratory protection.
DO
keep all parts of your body away from
the blade and all other moving parts.
DO
know how to stop the saw quickly in
case of an emergency.
DO
shut off the engine and allow it to cool
before refueling.
DO
inspect the blade, flanges and shafts
for damage before installing the
blade.
DO
use only blades marked with a maxi-
mum operating speed greater than
the blade shaft speed.
DO
use caution and follow the instruc-
tions when loading and unloading the
saw.
DO NOT
allow other persons to be near
the saw when starting, refueling
or when cutting.
DO NOT
run petrol or diesel engines in an
enclosed area unless there is
adequate ventilation.
DO NOT
use damaged equipment or
blades.
DO NOT
operate the saw in areas of
combustible material. Sparks
from the saw could cause a fire
or an explosion.
DO NOT
allow blade exposure from the
guard to be over 180 degrees.
DO NOT
leave the saw unattended with
the motor running.
DO NOT
operate the saw while under the
influence of drugs or alcohol.
This symbol indicates that the
machine is in conformance with
the applicable European directive.
DO
DO NOT
HATZ
14,7/20
112
95
0,72
HONDA
17,7/24
108
91
0,42
MODEL
POWER
LEVEL
Lwa (dB)
EN ISO 3744
Lpa (dB)
EN ISO 4871
NF
EN V 25349
MODEL /
KW / BHP
PRESSURE
LEVEL
VIBRATION
LEVEL
