Digital Projection LIGHTNING 10sx, Руководство пользователя

Страница: 24 / 151

Inputs 1, 2, 3 - Each of these inputs can be used for different signal sources. RGB,
Hs Vs and Hs+Vs are used with a computer input, Composite/G is used with a
composite signal (such as NTSC), C and Y (S-VIDEO) are used with a VHS video
player and Y Pr Pb are used with Betacam or component sources.
Select LED's - The input card LED's indicate which input should be used with the
current channel. If the projector cannot find a valid signal, the LED flashes.
Inputs 4 & 5 - These inputs provide for standard definition, 50hz and 60hz serial
digital video signals.
Input 6 - Input for 4, 4, 4 serial digital video signals.
Ext Remote - Input providing direct connection with the remote control unit.
Video Switcher - Control input and output for video switcher configurations.
Computer (In/Out) - Provides data input and output ports for computer control and
for daisy chain connector to multiple projectors.
INPUT 2
INPUT 1
INPUT 3
Audio
Switcher
Video
Switcher
Computer
Ext
Remote
In Out
Input 4
Input 5
DIGITAL
Input 6
CONTROL SOURCE
Component
S-Video
Composite
R/Pr
C
Ñ
G/Y
Ñ
CVbs
B/Pb
Y
Ñ
H/HV
Ñ
Ñ
V
Ñ
Ñ
Infra Red
Receiver Control
Section Source
Section Digital Source
Section
AÑ13
0verview
OVERVIEW
LBV00056; Revision A - 23/08/99