Digital Projection LIGHTNING 10sx, Руководство пользователя

Страница: 72 / 151

Mode Name - You can re-name the mode (maximum of nine characters).
Scan - The projector will automatically determine the horizontal and vertical
frequencies of the mode from the incoming signal.
Sync polarity - Check boxes are used to select the polarity of the horizontal and
vertical syncs. The N/A (not applicable) choice will cause the polarity to be ignored
in the selection of the mode. This is necessary in the case of Apple Macintosh
computers which do not utilise sync polarity.
Active Pixels - The pixel resolution can be set between 630 and 1280. The pixel
phase is defined by a number between 0 and 100.
Aspect Ratio - The aspect ratio is chosen from a flyout list.
When the mode parameters have been modified press the 'SAVE AS' button located
at the foot of the screen, to enter the SAVE AS window.
CÑ25
System Operation
OPERATION
LBV00056; Revision A - 23/08/99
D E L E T E M O D I F Y N E W C O P Y V I E W S E L E C T
K
- - -
O D E
5 0 0
C A N C E L
O K
S A V E A S
C o m p u t e r V i d e o 7
M o d e N a m e
S c a n S y n c P o l a r i t y
H o r 3 1 . 5 0 k H z P o s N e g N / A
V e r 6 0 . 0 0 H z P o s N e g N / A
R e s P h a s e
A c t i v e P i x e l s 8 0 0 1 0 0
A s p e c t R a t i o 4 x 3
8 0 0 x 6 0 0
M o d e P a r a m e t e r s
- - -
e r