Digital Projection LIGHTNING 10sx, Руководство пользователя

Страница: 14 / 151

Safety Warnings
All the safety warning in this manual are in bold italic type and can be identified by
the symbol shown on the left.
A list containing all the warnings is given below. It is recommended that time is
taken to study these before installing or operating the projector.
The projector should always be lifted using the handrail. Do not attempt to lift the
projector by holding the covers or the lens.
The customer should never attempt to disassemble the lamp from its housing or to
dispose of it other than by returning it to Digital Projection.
The condenser is precisely aligned in the factory. If it is moved there could be a
reduction in light output and image display quality.
Do not move or tamper with any seals or ducting panels on the projector or the
air flow could be disrupted and cause the projector to overheat. Always keep the
air inlets and outlets clear of any obstruction.
High Voltage, Danger of Death - the arc lamp power supply has a 30kV strike
pulse mechanism, which is active during lamp switch-on.
The projector should never, under any circumstances, be operated upside with the
lamp pointing upwards (i.e. with the right hand side facing downwards).
To avoid possible damage to the prism, lens and lent mount, a lens adapter must
by used if using POWER gv lenses on an LIGHTNING sx projector.
Never mount the projector near air conditioning or heating ducts, electrical
wiring or any materials which could be affected by the projector's operational
heat i.e. polystyrene ceiling tiles etc. The projector should never, under any
circumstances, be operated with the lamp pointing upwards (i.e. with the right
hand side of the projector facing downwards).
AÑ3
Overview
OVERVIEW
LBV00056; Revision A - 23/08/99