Digital Projection LIGHTNING 10sx, Руководство пользователя

Страница: 67 / 151

Configuration - Select either Video or Computer according to the input device. The
selections for a video configuration are PAL, NTSC, SECAM, CPENT and
S-VIDEO. An AUTO configuration will be applied if no selection is made.
If a CPENT video input is selected you must state the component format (RGB or
Y Pr Pb). Ext. Mixed Syncs should selected when using base band video signals
with a combined sync e.g. RGBS signals.
A computer configuration requires the selection of a computer card from the library.
Highlighting the computer card name field and pressing 'ENTER' will access a
flyout list containing all the cards in the library.
Film Look - When Film Look is 'ON' it enhances the appearance of film originated
material. Film Look 1 or Film Look 2 should be selected according to which
provides the optimum image. When "Computer" is selected, the check boxes are
greyed out and the function is disabled.
Colour Temperature - The Colour Temperature can be selected from a flyout list,
the choices are 3200°, 5400°, 6500° and 9300° Kelvin.
Aspect Ratio - A flyout list allows you to select the aspect ratio. The choices for
video are RAW, 4 x 3, 5 x 4, 8 x 5, 14 x 9, 16 x 9 and User. This field is 'greyed-
out' for a computer configuration and will state "Mode". The aspect ratio for
individual computer card modes is selected in the Size & Position Adjust window.
When first selecting RAW the number of pixels per line will be sampled 640 active
pixels. This can be modified using COMPMODE (see System Operation, C—24).
E-Zoom - When E-zoom is selected the entire image will be displayed in a window
centred within the DMD™ with the area outside the DMD™ window being black.
The window size can be adjusted in the Image Mode screen (see C—28).
After modifying any parameters, select 'OK' to store them to the new channel and
return to the Channel Set-up menu. If you have not entered an Input number a
message box will remind you. If you decide not to create a new channel, you can
select 'CANCEL' or press 'EXIT' on the remote at any time.
CÑ20
System Operation
OPERATION
LBV00056; Revision A - 23/08/99
✍