Digital Projection LIGHTNING 10sx, Руководство пользователя

Страница: 96 / 151

The headers, or command instructions, perform the actions described below. Any
subsequent implications are also described where appropriate.
Header Action Implication
00 Set lamp power level Level of ff will switch lamp on or to full
power and a level of 00 will switch lamp
off. Values in between will be translated
to nearest power setting.
01 Sets projector mutes None
03 Lock/unlock the user interface The projector will ONLY respond to
computer control if the lock command is
issued.
04 Queries projector capability Useful to determine the maximum input
frequencies.
05 Queries projectors settings Without using this command it is difficult
to determine exactly what the projector is
set to.
06 Queries model information Useful to differentiate between 848 x 600
1024 x 768 models.
07 Wipes memory in projector This wipes all information out of the
projector including colour balance and all
set up channels except 1, 2 and 3. It may
lock the projector up which will require a
power reset to correct.
08 Changes channel Black screen if non-set up channel or no
source on channel selected. It takes 2 or 3
seconds to lock to new channel.
CÑ49
System Operation
OPERATION
LBV00056; Revision A - 23/08/99