Digital Projection LIGHTNING 10sx, Руководство пользователя

Страница: 26 / 151

Power supplies
The General Power Supply provides a range of low voltage rails to the electronics.
The Xenon Arc Lamp has a separate high current power supply.
High Voltage, Danger of Death - the arc lamp power supply has a 30kV strike
pulse mechanism, which is active during lamp switch-on.
Remote Receiver
The optional remote receiver is used to pick-up infra-red signals from the remote
control unit and relay them to the projector.and also provides a 'hard wire' interface
between the remote control and the projector.
The remote receiver is a small 75mm x 100mm x 25mm (3" x 4" x 1") matt black
box with mounting lugs on each end and an infra red sensor on the front. On the
underside there are 2 connection points:- a 15 way high density 'D' style connector
for the projector and a 4 way 'LEMO' connector for the remote control (refer to
A—7 and D—18 for more information).
Hard Wired Remote Adapter
The hard wired remote adapter provides direct connection between the remote
control and the projector without the need for the remote receiver as an interface.
The remote adapter is provided as standard with LIGHTNING display projectors.
The adapter consists of two cables - a 15-pin high-density ‘D’ type plug to ‘XLR’
socket with integral decoder circuit and an ‘XLR’ plug to 3.5mm stereo jack plug.
This cable assembly enables the user to extend the remote adapter using a standard
audio/video cable (refer to A—8 and D—20 for more information).
AÑ15
Overview
OVERVIEW
LBV00056; Revision A - 23/08/99