Digital Projection LIGHTNING 10sx, Руководство пользователя

Страница: 92 / 151

BRI, SAT, SHARP, CON, HUE
These function buttons are used to select and adjust the image parameters. When
selected their associated icon and a numerical field will appear. The settings are
adjusted using the cursor keys with the
ñ
and
ð
cursors increasing the value and
the
ï
and
ò
cursors decreasing it.
POS
Sets the horizontal and vertical position of the image. Pressing a cursor key will
move the image in that direction.
SIZE
Sets the horizontal and vertical image size. The width is increased with the
ð
cursor
and decreased with the
ï
cursor. The height can be increased using the
ñ
cursor
and decreased using the
ò
cursor.
PIXEL
This function is used to adjust the number of horizontal pixels being sampled in the
incoming image and is only relevant for channels configured for computers. The
ñ
and
ð
cursors can be used to increase the value or the
ï
and
ò
cursors can be used
to decrease it.
PHASE
This function is only relevant to computer channels and is used to adjust the phase
of the pixel clock with the
ñ
and
ð
cursors increasing the value and the
ï
and
ò
cursors decreasing it.
COL
This function adjusts the colour temperature setting in steps of 100° (or 500°) from
3000° to 9000°. When this function is selected the colour temperature icon will
appear along with a numerical field showing the current temperature. The
ñ
and
ð
cursors can be used to increase the value or the
ï
and
ò
cursors can be used to
decrease it. Holding down a cursor key for up to 5 seconds will automatically step
100° per second, after 5 seconds the value will change in 500° steps.
CÑ45
System Operation
OPERATION
LBV00056; Revision A - 23/08/99