Digital Projection LIGHTNING 10sx, Руководство пользователя

Страница: 27 / 151

Integrated Keypad
An integrated keypad is provided on the rear of the projector to allow the projector
to be controlled without the remote control. The operation of this keypad is identical
to that of the remote control (see System Operation, C—1 for further details).
Remote Control
All the functions of the LIGHTNING display are controlled using the remote control
or the integrated keypad on the rear of the projector. The remote control can be
connected to the projector via the remote receiver or hard wired remote adapter.
This connection simultaneously powers the control unit, illuminates the remote
controls back panel and relays commands back to the projector.
To allow the operator more flexibility the remote control can be operated by four
AAA batteries, producing infra-red signals which are detected by sensors located at
the front and rear of the projector. The Remote Control unit is designed to transmit
command signals to the projector from a maximum distance of 80m (266ft).
Very bright fluorescent lighting or Infra Red translation systems may saturate the
projectors Infra Red receivers rendering remote control inoperative.
Palm Pilot Control Utility
The Palm Pilot Control Utility has been designed to allow extensive operational
control of the projector without using the on-screen menu system. The control
program is designed to operate with the computer port of any
LIGHTNING display
projector and is capable of controlling multiple (daisy-chained) projectors.
For information on operating the Palm Pilot Control Program refer to System
Operation, C—55.
There are other programs available for the Palm Pilot platform which provide for
full set-up and design, contact your Digital Projection dealer for further details.
AÑ16
Overview
OVERVIEW
LBV00056; Revision A - 23/08/99
✍