Digital Projection LIGHTNING 10sx, Руководство пользователя

Страница: 36 / 151

Mounting the Projector
Now that you know the distance from the screen that the projector must be located
you can decide on which type of mounting will best suit your requirements. The
easiest method of mounting is to rest the projector on a desk or table directly in
front of the display screen. If you intend to use this method, make sure that the desk
or table is strong enough to support the projector's weight safely.
Never mount the projector near air conditioning or heating ducts, electrical
wiring or any materials which could be affected by the projector's operational
heat i.e. polystyrene ceiling tiles etc. The projector should never, under any
circumstances, be operated with the lamp pointing upwards (i.e. with the right
hand side of the projector facing downwards).
At least 4 people are required for safe movement of the projector. The projector is
designed to be lifted using the handrail at the base. Do not attempt to lift the
projector by holding the front, the side covers or the lens.
MOUNTING FEET
There are four mounting points located on the underside of the projector for the
attachment of the mounting feet. Each foot is screwed into the mounting points and
tightened using a spanner on the flats of the foot shaft.
The projector can be levelled using the black adjustment rings on each foot which
allow 25mm (1 inch) of movement. The rubber foot base incorporates a ball socket
connector which will form to an uneven surface to assist in mounting.
Although the adjustment rings on the projector feet will allow the slight raising or
lowering of the front of the projector, it is recommended that projector is made
level and the lens shift feature is used to perform this function.
BÑ7
System Installation
INSTALLATION
LBV00056; Revision A - 23/08/99
✍