Digital Equipment DECstation 5000/100 Series, Руководство по обслуживанию

Страница: 316 / 392

Cache Fill Test
The cache fill test writes rotating data patterns to memory in
spans that are twice the size of the cache and then reads the
patterns. To run the cache fill test, type
t 3/cache/fill [
cache
] [
offset
] and press Return.
When you type the cache fill test command
Replace cache with a value that specifies the cache you
want to test.
Specify I to test the instruction cache.
Specify D to test the data cache. D is the default
value.
Replace offset with a specific cache address where you want
the test to start. The default address is 80500000.
Cache fill test error messages
Cache fill test error messages have the form
?TFL: 3/cache/fill ( description )
?TFL 3/cache/fill indicates that the cache fill test reported
an error.
description
represents an additional message that describes
the error.
D–24 Base System Test Commands and Messages